Description
51.2V 314Ah LiFePO4 Battery Wall-Mount: overview
The OSM 51.2V 314Ah LiFePO4 Battery Wall-Mount is a 51.2 V / 314 Ah rated wall-mounted LiFePO4 home battery, storing about 16 kWh of nameplate energy. It is engineered for home solar self-consumption, whole-home backup and off-grid living.
LiFePO4 (lithium iron phosphate) chemistry is the reference choice for this duty because it is thermally stable, keeps a flat voltage curve across most of the discharge, and tolerates daily deep cycling without the capacity walk-down that lead-acid suffers. The pack is assembled around Grade A cells and managed by a battery management system that enforces the published voltage, current and temperature limits from the factory.
Key features
51.2V 314Ah LiFePO4 Battery Wall-Mount
- 51.2 V at 314 Ah — about 16 kWh per pack
- Cycle life: 6,000 cycles at the published test conditions
- LiFePO4 chemistry for thermal stability and a flat discharge curve
- CAN / RS485 communication for inverter and EMS integration
- Integrated BMS guarding over-charge, over-discharge, over-current and temperature
Specifications
Electrical
| Nominal voltage | 51.2 V |
| Nominal capacity | 314 Ah |
| Nominal energy | 16kWh |
Cycle life and durability
Mechanical and environmental
| Dimensions | On request |
| Weight | On request |
| Installation | Wall-Mount |
Control, compliance and commercial
| Chemistry | LiFePO4 (LFP) |
| Communication | CAN / RS485 |
| BMS protection | Over-charge, over-discharge, over-current, short circuit, over-temperature |
Applications
| Application | Typical configuration | Why it fits |
|---|
| Solar self-consumption | PV array + hybrid inverter | Stores surplus daytime generation |
| Backup power | Critical-load panel | Bridges grid outages automatically |
| Off-grid systems | Scaled to daily consumption | Deep daily cycling without damage |
| Time-of-use arbitrage | Off-peak charging window | Shifts cheap energy to peak hours |
| Lead-acid replacement | Same nominal voltage | Lighter, longer lasting and maintenance-free |
- Home solar self-consumption
- Whole-home and essential-load backup
- Time-of-use tariff arbitrage
- Off-grid cabin and remote home power
- Retrofit onto an existing PV array
51.2V 314Ah LiFePO4 Battery Wall-Mount — installed configuration example
Sizing this wall-mounted LiFePO4 home battery for your project
51.2V 314Ah LiFePO4 Battery Wall-Mount stores 16 kWh per pack. For a rough bank size, multiply by the number of units: 1 unit ≈ 16 kWh, 4 units ≈ 64 kWh, 8 units ≈ 128 kWh, 16 units ≈ 256 kWh. Confirm the parallel limit and the inverter charge current before you finalise the string.
System voltage. This is a 51.2 V unit, so it matches the 48 V / 51.2 V class of hybrid and off-grid inverters and can sit on the same DC bus as other modules of the same voltage class.
Why buy from OSM
- Slim wall-mount cabinet that fits a garage or utility room
- Integrated BMS with RS485 / CAN for hybrid inverter pairing
- Parallel expansion to grow the bank as the load grows
- Silent operation with no maintenance and no gassing
- Factory-direct pricing with OEM/ODM branding
OSM Battery manufactures and exports LiFePO4 batteries and energy storage systems for distributors, installers and project developers. Every order is built to the published specification, tested before dispatch, and shipped with the documentation your market needs.
51.2V 314Ah LiFePO4 Battery Wall-Mount — application example
OEM and ODM customization
Beyond the standard configuration, OSM builds to order: enclosure colour and branding, nameplate and label artwork, packaging, cable and connector sets, communication protocol selection and matched charger or inverter bundles. Send the target specification and the artwork, and the engineering team returns a drawing and a quotation.
Frequently asked questions
How long does this wall-mounted LiFePO4 home battery last?
The published cycle life is 6,000 cycles. At one full cycle per day that is well over ten years of service, and the usable life is normally limited by the depth of discharge and the operating temperature rather than by the cells themselves. Keep the pack inside its published temperature window and let the BMS manage the charge profile.
What chemistry does this wall-mounted LiFePO4 home battery use?
It uses lithium iron phosphate (LiFePO4 / LFP) cells with a nominal rating of 51.2 V / 314 Ah. LFP is chosen for this duty because it is thermally stable, holds a flat voltage curve for most of the discharge and tolerates daily deep cycling far better than lead-acid or NMC.
How much energy is that in practice?
The nameplate energy is about 16 kWh per pack. Usable energy is a little lower because most systems do not go to a full 100% depth of discharge — 90% is the usual planning figure, and that is what to use when you size the bank against daily consumption.
Which inverters and EMS platforms will it talk to?
Communication is CAN / RS485. That covers the mainstream hybrid, off-grid and C&I inverter protocols, so in most projects the battery pairs with the inverter without a protocol converter. Send us your inverter model and we will confirm compatibility before you order.
Do you supply samples and OEM branding?
Yes. OSM supplies single units and samples, and offers OEM/ODM on the enclosure, the label, the nameplate and the packaging. Send the artwork and the target specification and we will return a quotation with the lead time.
How is it shipped and what documents come with it?
Shipments go out as Class 9 dangerous goods with the UN38.3 test summary, the MSDS and the transport documents, packed for sea or air freight. Bulk orders can be consolidated so the container is loaded to suit your warehouse.
Request a quotation
Tell us the voltage, the capacity or the kWh you need, the inverter you are using and the quantity — the OSM team will come back with a price, the datasheet, the MOQ and the lead time. Samples and OEM trials are available.
Contact OSM Battery for wholesale pricing, OEM/ODM and project support.
