OSM Lithium Iron Phosphate Battery WallPro 51.2V 200Ah 10kWh
OSM wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion.
Strong & Durable Structure
||46.4V – 57.6V
|Maximum Charging/Discharging Current
||Robust Multi point monitoring BMS pre installed
|Life Cycling (0.5C 25℃)
||10MWh per kWh
|5 years， whichever comes sooner
||0℃ ~ 45℃
||-20℃ ~ 35℃
||95kG each pack
||850*500*165 mm/ each battery pack
||MSDS, UN38.3, RoHS, IEC62619, UL(for cells)
||RS485, CAN or RS232 for hybrid inverters
Lithium Iron Phosphate(LiFePO Battery) can be used in most applications that use Lead Acid, GEL or AGM type batteries.
Suitable applications include:
•Switching applications and more
•Base transceiver station
•Electronic cash registers
•Microprocessor based office machine
FEATURES & BENEFITS
High cycle life
6000 cycles @80% DoD for effectively lower total of ownership cost
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
up to 6 months.Thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
- Do NOT short circuit, reverse polarity, crush or disassemble.
- Do NOT heat or incinerate.
- Do NOT immerse in any liquid.
- Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.